AirSolar Services

Solar Panel Inspection Report

A written visual inspection of your solar array at the same visit as the clean — glass, frames, cabling, isolators, mounting and shade.

ARC AU067842 Southeast Queensland Aircon & solar cleaning

Get a free quote

Tell us what needs cleaning and we’ll come back with a price.

Prefer to talk? 0422 778 277

A solar panel inspection happens on the same visit as the clean, because the roof access is already paid for. Your system’s monitoring app tells you what the inverter thinks it produced. It does not tell you that a panel has cracked glass, that a cable is sitting in a puddle on the roof, or that a section of the array is under shade for two hours a day. A visual inspection at the clean does.

Solar panels being cleaned with a water-fed brush on a rooftop array

What a solar panel inspection checks

  • Glass — cracks, chips, delamination and hot-spot staining.
  • Frames and rails — corrosion, loose fixings and panels sitting out of line.
  • Cabling — cable sitting in water, chafing on the roof edge, ties that have perished.
  • Isolators, junction boxes and conduit — visible damage, sun degradation, water entry.
  • Mounting and roof penetrations — lifted flashings and the tell-tale staining of a leak path.
  • Shade — new growth, a satellite dish, a new build next door, or anything that has appeared since install.
  • Debris and nesting — including under the array, which is where birds get in.

What you get

  • A written summary of what was observed, panel by panel where relevant.
  • Photographs of anything that needs attention, plus before-and-after photos of the clean.
  • A plain statement of what we can see, and what only a licensed electrician or your installer can test.

Scope: this is a visual inspection from the roof surface during a clean. It is not an electrical test, a thermographic scan or a structural certification. Anything electrical is referred to AirSolar Power, which holds the electrical contractor licence for that work.

Why a visual inspection is worth having

Most solar problems announce themselves visually long before they show up as a number on an app: a cracked panel, a cable in water, a hot-spot stain, a nest under the array. A clean without a look is a missed opportunity, because the roof access is already paid for.

When an inspection report is worth asking for

  • Before buying or selling a property with solar.
  • When your generation has dropped and the app does not explain why.
  • After a hail event, a storm or a dust storm.
  • Before an installer’s warranty period runs out.
  • On a commercial or strata array being signed off as maintained.

Common questions

How often should solar panels be inspected?

At every clean is the practical answer, because the roof access is already paid for. Separately: after hail or a storm, and before an installer’s workmanship warranty runs out.

What maintenance do solar panels need?

The panels need cleaning and a visual inspection. The system around them — inverter, cabling, isolators, mounting and roof flashings — is what ages, and that is what the inspection looks at.

Do solar panels need cleaning, or does rain do it?

Rain rinses loose dust and leaves the film, the droppings and the mineral residue as it dries. Tilted glass sheds water before it can lift the dirt, which is why an array can look streaked after a storm and still be shaded.

How often should solar panels be cleaned?

Once or twice a year for most Southeast Queensland roofs. More often near main roads, under trees, on a farm, or after a dust storm or bushfire smoke event.

Book a clean and inspection together: 0422 778 277 or send your suburb and panel count.

Get your aircon or solar panels cleaned

Send us your suburb and what needs cleaning and we will come back with a quote — no call-out surprises.

ARC AU067842 Southeast Queensland admin@airsolar.com.au