Split System Aircon Cleaning & Deep Clean
Deep cleaning for wall-mounted split systems across Southeast Queensland — filters, coil, blower, drain tray and outdoor unit.
Split system aircon cleaning is a full strip-down, not a wipe-over: the head comes apart, the parts that hold the dirt get washed, and the unit goes back together. A split system pulls every bit of dust, cooking residue, pollen and humidity out of your room and pushes it through the same coil and filter day after day. Cleaning it properly means taking the unit apart, washing the parts that collect that load, and putting it back together so it runs as it was designed to.

What split system aircon cleaning covers
Every clean is a full strip-down of the indoor head, not a wipe-over. What we work through:
- Filters — removed, washed and refitted; we will tell you if they are past cleaning and need replacing.
- Evaporator coil and fins — cleaned in place so the air passes over bare metal again rather than a mat of dust.
- Blower wheel and barrel — the part that carries most of the mould and the smell, and the part most one-hour cleans skip.
- Drain tray and drain line — flushed so water runs away instead of sitting, souring and overflowing.
- Louvres, casing and grille — washed and dried before reassembly.
- Outdoor condenser unit — coil and fan cleaned of leaves, dust and lawn clippings so it can shed heat.
What we do not touch: refrigerant work and electrical repairs. Those are carried out by AirSolar Power under its own electrical contractor licence, quoted separately.
Deep clean, chemical clean or a standard clean?
These get used loosely, so here is what each one means when we quote it:
- Standard clean — strip the head, wash the filters, coil, blower wheel, louvres and casing, flush the drain, clean the outdoor unit.
- Deep clean — the same job on a unit that has not been done in years, or on one with heavy build-up: longer on the coil and blower, more time on the drain, and the treatment applied twice where the growth is thick.
- Chemical clean — a chemical coil cleaner used where washing alone will not lift the load: greasy kitchens, heavy mould, smoke or renovation residue. It is a method used inside the clean, not a different service.
We will tell you which one your unit actually needs after we look at it, rather than quoting the most expensive option by default.
Why the blower wheel matters more than the filter
People rinse the filters and assume the unit is clean. The filters catch the big dust; the fine dust and moisture get past them and stick to the blower wheel and the coil. That layer holds moisture, and damp dust is what mould grows in. It is also why a unit can look clean at the grille and still smell when it starts.
Once the wheel is coated, the fan moves less air for the same effort — the room takes longer to cool, the unit runs longer, and the noise changes. A clean unit does not have to work as hard to do the same job.
How the visit runs
- We confirm which units are being cleaned and check access and power.
- Furniture and floor under the indoor head are covered, and the unit is isolated before anything is opened.
- The head is stripped, washed and reassembled; the outdoor unit is cleaned.
- We run the unit, check drainage and airflow, and show you what came out.
- You get before-and-after photos of the units we worked on.
When to book a split system clean
- Before summer, so the first hot week is not the week you discover the airflow problem.
- When the unit smells musty or sour in the first few minutes of running.
- After a dust storm, bushfire smoke, or a renovation that filled the house with gypsum dust.
- In households with pets, or with someone who reacts to dust and pollen.
- Before a property goes on the market, or at the end of a tenancy.
Common questions
What is included in a clean?
Filters washed, coil and blower wheel cleaned, drain tray and line flushed, louvres and casing washed, the outdoor condenser cleaned, then the unit run and checked. You get before-and-after photos of the units we worked on.
How often should my aircon be cleaned?
Once a year for a household split system in Southeast Queensland, and every two years for ducted. Move to six or twelve months where the unit runs daily, there are pets, or someone in the house reacts to dust.
How long does a clean take?
A single split system is one visit. A multi-head or ducted system takes longer in proportion to the number of heads or outlets, so we confirm the count when you book and plan the visit for the whole system.
Can I clean my aircon myself?
You can rinse the filters monthly and that helps. The coil, blower wheel and drain sit behind the casing — that is the part that needs a strip-down, and it is where DIY attempts usually do damage.
Can a mouldy aircon make you sick?
We are cleaners, not doctors, so we will not make a health claim. What we can say is that mould growth and the dust it lives on sit in the airstream, and removing them removes a source of airborne particles. If someone in the house has a respiratory condition, that is a conversation with their doctor.
Ready to book, or want a quote for your property? Call 0422 778 277 or send us your suburb and how many units you have.
Get your aircon or solar panels cleaned
Send us your suburb and what needs cleaning and we will come back with a quote — no call-out surprises.